Trigger 6 Shooter Wireless Accessory Control System (3001)

Control box:

• 6 channels, 2 x 30 amp circuits, 2 x 10 amp circuits, 2 x 5 amp circuits, All Solid State, 12-24 volt
• RF Remote switch pad usable inside or outside the vehicle
• Bluetooth control from phone/tablet app
• Manual buttons for on/off on top of case
• DIN connector built in for manual control with conventional toggle switches (harness sold separately)
• Low voltage cutout to shut down Trigger if battery voltage gets low
• 100 amp fuse installed on positive input wire for protection
• 12 to 24 volt out with waterproof connectors
• Fuse's built in, waterproof cover (30 amp - 1 and 2, 10 amp - 3 and 4, 5 amp - 5 and 6)
• LED's to indicate relay on and if fuse is blown, blue for circuit on, red for blown fuse
• Waterproof case design, withstands temps to 250 deg. F and -20 deg. F below freezing
• 12 to 24 volt input, 3 wires, ground, switched positive, battery positive

RF Remote:

• 2.4 ghz frequency hopping RF connection to control box
• Replaceable battery power and/or 12 volt hardwired option for backlit switches
• Back lit with press of button, delayed off for the back light. If hardwired, provides a color changing option adjustable from App
• Back lights stay lit when vehicle lights are on
• Custom switch labels included
• Weatherproof design

App Control:

• Apps for both Android and iOS with simple interface for turning on and off the 6 channels
• Allows customized names for each channel
• Battery voltage shows in App screen
• Controls backlight color in the RF switch pad
• App allows for dimming and strobe functions in addition to ON/OFF

Harnesses:

• Kit includes six 8 ft wire harnesses with the mating connector to the control box on one end and blank wires on the other; Two 12 gauge, two 14 gauge, two 18 gauge