Tecmate OptiMate PRO1 DUO 12V 10A Battery Charge-Tester/Power Supply (TM-650US)

OptiMate PRO-1 DUO, the professional combination battery charger-tester & power supply for powersport & small craft / machine professionals, repair shops and battery retailers.

• Suitable for new or used 12V lead-acid (3-50Ah) and 12.8V/13.2V LiFePO4 (2-20Ah).
• 3 Selections: Select a charge mode for 12V lead-acid OR 12.8V LiFePO4, or select PowerSupply mode for battery support during vehicle diagnostics, tuning or troubleshooting.
• Automatic fast battery activation: flashing green test light indicates battery is healthy and sufficiently charged.
• Smart recovery mode for deep discharged batteries, a bad battery is quickly identified, a good battery receives charge is retested after.
• Pushbutton activated BMS reset for LiFePO4 batteries.
• Test indication for GOOD (80 to 100%), OK (60 to 80%) and BAD (below 60%) batteries.
• Powersupply mode provides constant power for vehicle tuning, diagnostics and troubleshooting.
• Global input - 100 to 240V 50-60Hz.
• AC power socket for Class 2 power cords.
• Certification - CE, UKCA, NRTL (UL & CSA), PSE (Japan), SAA (Aus & NZ).
• Portable use - Vehicle hanging hook and wall receiver included.
• 50% less energy, 50% lower cost.
• Power Factor Correction
• Synchronous Rectification
• Ideal for: 12V lead-acid STD & AGM from 3-50Ah and 12.8V/13.2V Lithium LFP (LiFePO4) from 2-20Ah.
• Charging AMPS: 0.4A to 10A variable (Ampmatic)
• Charging Volts: 12V lead-acid: 0.5V to 22V. 12.8V/13.2V Lithium LFP (LiFePO4): 0.5V to 14.4V. Powersupply: 11V to 13.6V.
• Operation: Selectable
• Use: Indoor rating IP40.
• Input: Global (100-240V 50-60Hz), high efficiency.
• Style: Case with rubber bumbers, with wall-mount or hanger bars. AC Class 2 input socket, with ON/OFF switch, 15cm / 6" output cord.
• Included cables: Class II AC cord suitable for region, O-43 charge lead extender 180cm/72" and O-14 fused battery clips.
• Included hardware: Wall storage receiver and bar hanging hook.