Feuling Black Cap Vented Dipstick (3092)

(No reviews) Write a Review
$320.95
$299.95
(You save $21.00 )
Adding to cart… The item has been added
  • Screws into the factory oil fill spout as a stock replacement part on M-Eight baggers
  • This breathing dipstick removes unwanted build-up of blow by, which is found in engines with excessive leakdown through the rings/cylinders which is a common issue with large displacement big bore engines
  • Test results show a decrease in engine sump oil levels
  • Two venting style options are available when installing dipstick
  • Dipstick vents excessive pressure from the oil tank through a breather system consisting of a filter element and umbrella valve
  • There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU)
  • If reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labeled FHS (Full Hot Stand)
  • When reading the dipstick with the bike upright and level you will take the reading from the dimples labeled FHU (Full Hot Upright)
  • Made in the U.S.A.
  • Two venting style options when installing dipstick: 1) Use the 1/8 NPT breather vent fitting with internal porous filter element (this option gives a clean look; however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by). 2) Use quick-disconnect coupler fitting with rubber hose and filter element (this option will run any excessive oil misting/residue through the line and into the filter element, but does requires disconnecting the fitting in order to check the oil). For option 2, we recommend routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail.
  • The oil pick-up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.
Compatible Vehicles
Years Make Make Notes
2007-2013 Harley-Davidson Electra Glide Classic FLHTC
2007-2009 Harley-Davidson Electra Glide FLHT
2015-2016 Harley-Davidson Electra Glide Low Ultra Classic FLHTCUL
2015 Harley-Davidson Electra Glide Low Ultra Limited FLHTKL
2007-2016 Harley-Davidson Electra Glide Ultra Classic FLHTCU
2010-2015 Harley-Davidson Electra Glide Ultra Limited FLHTK
2015-2016 Harley-Davidson Freewheeler FLRT
2010-2013 Harley-Davidson Road Glide Custom FLTRX
2007-2009 Harley-Davidson Road Glide FLTR
2015-2016 Harley-Davidson Road Glide FLTRX
2015-2016 Harley-Davidson Road Glide Special FLTRXS
2011-2013 Harley-Davidson Road Glide Ultra FLTRU
2016 Harley-Davidson Road Glide Ultra FLTRU
2007-2013 Harley-Davidson Road King Classic FLHRC
2007 Harley-Davidson Road King Custom FLHRS
2007-2016 Harley-Davidson Road King FLHR
2007-2016 Harley-Davidson Street Glide FLHX
2014-2016 Harley-Davidson Street Glide Special FLHXS
2010-2011 Harley-Davidson Street Glide Trike FLHXXX
2009-2013 Harley-Davidson Tri Glide Ultra Classic FLHTCUTG
2015 Harley-Davidson Tri Glide Ultra Classic FLHTCUTG
2016 Harley-Davidson Tri Glide Ultra FLHTCUTG
2016 Harley-Davidson Ultra Limited FLHTK
2016 Harley-Davidson Ultra Limited Low FLHTKL

Customers Also Viewed