Andrews XL Cams V4 (298140)

ANDREWS - XL AND BUELL CAMS

• N3 cams are bolt-in for 05-10 883/1200 engines with stock springs and heads (cams for 04-06 models with more than .465" lift may need different valves, springs and collars).
• V2 and N2 are bolt-in cams for stock applications designed for up to 6000 rpm.
• N8 designed for modified 883, 1100 and 1200 stroker models; stock springs and hydraulic lifters recommended; rpm range 2000-6000.
• Stock base circle sizes allow the use of stock pushrods.
• V4 and N4 are for stock or modified applications and have a slightly higher idle speed, but can be used with stock hydraulic lifters and springs; rpm range of 2500-6500.
• V6 and N6 designed for modified 1200s to 80" and/or high compression pistons: stock springs and hydraulic lifters recommended; rpm range 2500-6500.
• V8 and N8 designed for modified 883, 1100 and 1200 stroker models; stock springs and hydraulic lifters recommended; rpm range 2000-6000.
• Made in the U.S.A.
• Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed.
• N6 designed for modified 1200s to 80" and/or high-compression pistons: stock springs and hydraulic lifters recommended; rpm range 2500-6500