Valvetrain

Can be used with the factory pushrod tubes and are the longest fast-install pushrods available. Standard .095" wall thickness. Made from the same great design as the regular install Feuling® adjustable pushrods but feature a slightly...

Designed for riders who want more horsepower and the powerband higher in the RPM range Requires high-lift valve springs (Fueling Beehive Endurance or High Load valve springs recommended) Higher compression also recommended, along with performance...

Gas nitrided and final surface treated Kit includes the shafts and our ARP bolts Recommended for all Twin Cam engines and especially for engines running higher lift camshafts and heavier valve spring pressures Fits: TC DYNA & FL 99-00, SOFTAIL...

Gas nitrided and final surface treated Kit includes the shafts and our ARP bolts Recommended for all Twin Cam engines and especially for engines running higher lift camshafts and heavier valve spring pressures Fits: TC Dyna 01-17, FL 01-16, Softail...

Gas nitrided and final surface treated Includes the shafts and ARP bolts. Recommended for all Twin Cam engines and especially for engines running higher lift camshafts and heavier valve spring pressures Compatible...

Tensile strength rated at 170,000 psi; superior and stronger than OEM and stronger than grade 8 fasteners. Wide, underhead flange design provides even load distribution for optimum sealing of surfaces to prevent leaks. Quality 12-point,...

CONVERSION CAM PLATE PART for 99-06, except 06 Dyna - has the original style 99-06 Twin Cam® cam bearing bores for use with the press in bearings. This cam plate is designed to use the new style 07-14 Factory hydraulic chain tensioner system...

CONVERSION CAM PLATE PART for 99-06, except 06 Dyna - has the original style 99-06 Twin Cam® cam bearing bores for use with the press in bearings. This cam plate is designed to use the new style 07-14 Factory hydraulic chain tensioner system...

CONVERSION CAM PLATE PART for 99-06, except 06 Dyna - has the original style 99-06 Twin Cam® cam bearing bores for use with the press in bearings. This cam plate is designed to use the new style 07-14 Factory hydraulic chain tensioner system...

Made in the U.S.A. NOTE: Fits Twin Cam Screamin Eagle heads with 5/16 inch valve stems with standard keeper grooves and .530 inch diameter valve guides, 200+ lbs springs, titanium retainers, seats, seals, keepers, and seat shims Compatible...