Accessories

Perfect for anchoring a PWC in shallow water, just off the beach. Screw the zinc-plated anchor into compacted sand or mud in 2 to 3 ft. of water. There's a giant nylon snap hook at each end of the 8 ft. long marine grade rope. Snap one to the screw...

Allows any 2-3/4" ID flange K&N, Blowsion, Prok, etc., flame arrestors to mount to the carburetor indicated Mounting bolts included

Ultra-tough polymer composite protects keel from rocks, ramps, abrasive sand and trailer damage Patented hydrodynamic drag reduction design improves performance and handling Easy DIY kit installs in under 1 hour May not fit some keel designs

Can be activated automatically to start/stop draining water when water reaches the high/low set point Provides the Manual wire and could be switched into manual draining water if necessary DC12V/2.4A, DC13.6V/2.9A Size 105.5 mm wide x 110 mm height

Manufactured to be stainless motor shaft which leads to high efficiency, capacity, quality of water cooled motor and low power consumption DC12V/3A, DC13.6V/3.5A Size 105.5 mm wide x 110 mm height 3/4 inch outlet diameter

Brass grommet drain hole on bottom for easy drainage Constructed of heavy-duty waterproof nylon material Heavy-duty galvanized snap hook 3" x 5" color-matched rope float 10' of 3/8" polypropylene rope Fill with sand, rocks or...

Brass grommet drain hole on bottom for easy drainage Constructed of heavy-duty waterproof nylon material Heavy-duty galvanized snap hook 3" x 5" color-matched rope float 10' of 3/8" polypropylene rope Fill with sand, rocks or...

Brass grommet drain hole on bottom for easy drainage Constructed of heavy-duty waterproof nylon material Heavy-duty galvanized snap hook 3" x 5" color-matched rope float 10' of 3/8" polypropylene rope Fill with sand, rocks or...

Ever lost your boat keys on the bottom of the lake or wish you had a bumper to protect your PWC from the edge of the dock? Well, now you can get Slippery accessories to help you out in these situations. Check out our gear to make your day on the water...

Keeps your PWC from getting scratched and gouged by docks, rafts, lifts, etc