Accessories

Optional remote add-on gives you the ability to control temperature settings wirelessly. Simply pair the remote with a Dual Digital Controller (sold separately). Water-resistant and operates using a CR2032 lithium battery that can easily be replaced...

Panel mount port is to be installed on your bike and connects to your battery harness. Use the port to plug in you temperature controller.

This battery harness has an inline fuse holder on the positive (red) lead. The fuses that are included are Violet for 3 amp, Peach for 5 amp, Brown for 7.5 amp, Red for 10 amp and Blue for 15 amp, Yellow for 20 amp. The battery harness is 38" long...

The Junior Controller has a built-in Y-harness for use with gloves or socks hen not plugged into your jacket liner or pant liner. The Junior Controller may only to be used for 5 amps or less (gloves or socks) The Junior Controller has four power level...

The SAE Female Plug can be used to connect to your bike's battery tender on one side, while the female coax on the other end connects to your Temperature Controller. This adapter wire is also used if you have an older style of heated clothing that...

The SAE Male Plug is generally used for converting most SAE heated clothing plugs to a Coax option. 8" length Max capacity 20 amps

The single dial controller is to be connected and used to control the temperature on you heated vest. It can also be used with heated gloves when ombined with a y-harness.

The Splitter is used when you want to make one circuit from the jacket liner to one of the other accessories with a single controller.

The 12V On/Off Switch is used as a backup to control the heat of your heated gear. When turned on your heated clothing will be heated at full strength (+135deg F). When turned off there will be no heat. The On/Off Switch is an alternative option in case...

The Y Harness is used for hooking up the gloves or socks when not plugged into your Jacket Liner.