Valvetrain

Includes camshafts, lifters and a cam installation kit that includes the cam bearing, cam/crank hardware Includes Race Series® lifters Made in the U.S.A.

Includes camshafts, lifters and a cam installation kit that includes the cam bearing, cam/crank hardware Includes Race Series® lifters Made in the U.S.A.

Replacement nut for Feuling Quick install pushrods #4096 and #4097 Compatible Vehicles Years

Feuling® studs and nuts help relieve the stress put on the factory and SE cylinder heads, which have an extremely weak link with the rocker arm shaft standoffs Highly recommended if using higher...

Feature precision rolled threads for optimum engagement, to prevent galling and promote more consistent torque loading Tensile strength rated at 180,000 psi; superior and stronger than OEM and...

ECONO Available for 5/16" and 7mm valves. Seat lbs./installed height; 183 lb. at 1.770" (0.510" lift), 175 lbs. at 1.795" (0.535" lift), 172 lbs. at 1.813" (0.553" lift), 165 lbs. at 1.835" (0...

ECONO Available for 5/16" and 7mm valves. Seat lbs./installed height; 183 lb. at 1.770" (0.510" lift), 175 lbs. at 1.795" (0.535" lift), 172 lbs. at 1.813" (0.553" lift), 165 lbs. at 1.835" (0...

ECONO Available for 5/16" and 7mm valves. Seat lbs./installed height; 183 lb. at 1.770" (0.510" lift), 175 lbs. at 1.795" (0.535" lift), 172 lbs. at 1.813" (0.553" lift), 165 lbs. at 1.835" (0...

ECONO Available for 5/16" and 7mm valves. Seat lbs./installed height; 183 lb. at 1.770" (0.510" lift), 175 lbs. at 1.795" (0.535" lift), 172 lbs. at 1.813" (0.553" lift), 165 lbs. at 1.835" (0...

ECONO Available for 5/16" and 7mm valves. Seat lbs./installed height; 183 lb. at 1.770" (0.510" lift), 175 lbs. at 1.795" (0.535" lift), 172 lbs. at 1.813" (0.553" lift), 165 lbs. at 1.835" (0...

ECONO Available for 5/16" and 7mm valves. Seat lbs./installed height; 183 lb. at 1.770" (0.510" lift), 175 lbs. at 1.795" (0.535" lift), 172 lbs. at 1.813" (0.553" lift), 165 lbs. at 1.835" (0...

Tensioner housings are precision machined from billet 6061 aluminum, pads are injection-molded nylon with PTFE added to increase wear and friction resistance Replaces the factory cast unit with a...