Titanium locks are offset 10 degrees. Offset locks raise retainer to gain .050" installed height. A selection of high-quality machined valve locks available in stock replacement, offset or...

Both HP+® and Race Series® kits include Feuling's® HIGH FLOW billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory, SE® and other...

Take the guesswork out of ordering. Includes: Feuling® HP+® high-volume oil pump, high-flow billet Camplate, REAPER® Series Camshafts, HP+® hydraulic roller Lifters, Fast...

CONVERSION CAM PLATE PART for 99-06, except 06 Dyna - has the original style 99-06 Twin Cam® cam bearing bores for use with the press in bearings. This cam plate is designed to use the new...

Both HP+® and Race Series® kits include Feuling's® HIGH FLOW billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory, SE® and other...

Smooth camshaft lobe ramps are easier on valve-train components and eliminate excessive valve-train noise and wear. Produce more power and torque in the riding RPM range increasing throttle...

Smooth camshaft lobe ramps are easier on valve-train components and eliminate excessive valve-train noise and wear. Produce more power and torque in the riding RPM range increasing throttle...

Extends life of top end valve gear. Made in the U.S.A. When used with Feuling® oil pump, they will increase critical oil flow to valves, springs, rockers, shafts and valve guides. Sold in...

Sold in a set of four. Available in oversize diameters. Maintains proper and critical oil flow to valves, springs, rockers, shafts and valve guides. Exceeds the needs of large-lift camshafts and...

Can be used with stock pushrods and valve springs. Feuling® recommends matching new camshafts with new lifters but not required. RPM range 2,100 - 6,800+. Bolt-in Reaper® cams for...

ECONO Available for 5/16" and 7mm valves. Seat lbs./installed height; 183 lb. at 1.770" (0.510" lift), 175 lbs. at 1.795" (0.535" lift), 172 lbs. at 1.813" (0...